The Module-X3 comes with a pigtail consisting of a network and an I/O cable. Both cables have a length of 2 meters.
The I/O cable breaks out in 14 pins.
The Module-X can be powered via PoE+ (IEEE 802.3at) using the network cable or by providing 24 - 48 Volt DC on the I/O cable.
When using the relay functionality of the I/O cable, a Metal Oxide Varistaror (MOV) over the contacts of the screw terminals or connector where the I/O cable of the Module-X is connected, is required. This will protect the camera from switching / induced surges and serves for noise suppression.
IMPORTANT
For the Module-X3 there are multiple I/O cables:
V1, V2 and V4.
The wiring diagram of the versions are different.
The correct wiring diagram can be found in the Quick start guide, that is enclosed in the box of the Module-X.
Wiring diagram
version AV0017-04 -TRVVSP *7P+F+AL +B OD:8. 7±0.2mm
P1 |
Color |
Description |
|
|---|---|---|---|
1 |
orange |
RS485- (B) |
OSDP |
2 |
white/red |
Wiegand D0 |
|
3 |
black |
Relay_B COM |
|
4 |
white/black |
Relay_A NO |
|
5 |
red |
Wiegand D1 |
|
6 |
black/orange |
RS485+ (A) |
OSDP |
7 |
brown |
GND |
|
8 |
black/brown |
Relay_B NO |
|
9 |
blue |
Relay_A COM |
|
10 |
black/blue |
CTL IN1 |
>2.2=high |
11 |
green |
GND |
|
12 |
black/green |
GND |
|
13 |
yellow |
EXT power in |
24VDC~48VDC |
14 |
black/yellow |
EXT power in |
24VDC~48VDC |
Version I/O cable v2 - AV0017-02 - TRVVPS 7x2x02m2
P1 |
Color |
Description |
|
|---|---|---|---|
1 |
orange |
RS485- |
OSDP |
2 |
white/red |
Wiegand D0 |
|
3 |
black |
Relay_B COM |
|
4 |
white/black |
Relay_A NO |
|
5 |
red |
Wiegand D1 |
|
6 |
black/orange |
RS485+ |
OSDP |
7 |
brown |
GND |
|
8 |
white/brown |
Relay_B NO |
|
9 |
blue |
Relay_A COM |
|
10 |
white/blue |
CTL IN1 |
>2.2=high |
11 |
green |
GND |
|
12 |
white/green |
GND |
|
13 |
yellow |
EXT power in |
24VDC~48VDC |
14 |
black/yellow |
EXT power in |
24VDC~48VDC |
Version - I/O cable v1 - AV0017-01 - LIYY-P8X2X0.14
P1 |
Color |
Descriptiom |
Description |
|---|---|---|---|
1 |
green |
RS485- |
OSDP |
2 |
pink |
Wiegand D0 |
|
3 |
red |
CTL OUT1 COM |
|
4 |
blue |
CTL OUT2 NO |
|
5 |
grey |
Wiegand D1 |
|
6 |
yellow |
RS485+ |
OSDP |
7 |
black |
GND |
|
8 |
white |
CTL OUT1 NO |
|
9 |
brown |
CTL OUT2 COM |
|
10 |
purple |
CTL IN1 |
>2.2=high |
11 |
blue/red |
GND |
|
12 |
pink/grey |
GND |
|
13 |
yellow/white |
EXT PWR |
24VDC~48VDC |
14 |
brown/yellow |
EXT PWR |
24VDC~48VDC |
